Switchroot Android 10 Q Guide Full Dual Boot

[prb]

EASY DUAL BOOT GUIDE INCLUDING ALL DOWNLOADS

BACKUP YOUR SD CARD FIRST YOU HAVE BEEN WARNED
YOU CAN RESTORE LATER
IF YOU FOLLOW ALL STEPS YOU WILL NOT LOSE ANY DATA

This is AIO Guide just follow and you will have switch hos and Android 10 fully rooted dual boot on one memory card with Access to Switch Hos partition

FIRST DOWNLOAD BOTH PC AND SD DOWNLOADS

PC DOWNLOAD (hekate_ctcaer_5.5.4.bin) PLACE IN YOUR TegraRcmGUI folder on your pc
https://mega.nz/file/k9symBzZ#1P_o95LQraZV6k9W1FHGqR1QelUgqSiSGa4GPHcR0zc

SD DOWNLOAD
https://mega.nz/file/5ttQiAhJ#lMRhj3KBxB8rMt7eEtvkbgj5oJSHY-frj0quTp79i0k

1, Ensure your SD Card is Fat32 very important
2, Get the files from the SD Download and place all the files from inside the sd folder to the ROOT OF YOUR SD CARD Overwrite any existing existing files
3, Boot switch to CFW with your joycons attached to the console, this will pair them
4, Now reboot your switch into hekate, and select the 'Nyx Options' menu

5, Now select 'Dump Joy-Con BT' in the top right.

6, Ensure the message looks as follows, if not then re-pair Joy-Cons in your CFW.

7, Now return to the hekate main menu and select 'Tools' then 'Partition SD Card' in the top right.

8, Click ok

9,Drag the Android slider to assign the amount of space you want for Android, the HOS slider shows how much space the normal Switch OS can use.
and click next step

10, Note if you have not backed up click sd ums and back up all your data BEFORE CLICKING START
IF YOU ALREADY BACKED UP JUST PRESS START AND MOVE ON TO NEXT STEP

11, Let it finish then click the sd ums button now restore your backup data
then eject switch from pc but keep connected via usb (right click on mouse hover over switch)

12, Select the 'Flash Android' option and follow the steps, then press continue to reboot to recovery.

13, If you miss the opportunity to reboot to recovery go to 'More Configs' and select 'switchroot Android 10' while holding volume up, keep holding till the TWRP logo shows.

14, Once you're in TWRP swipe the bar to allow modifications and press 'Install'.

15 ,Press 'Select Storage' in the bottom right and choose 'Micro SD Card'

16, First install the lineage-17.1-20210205-UNOFFICIAL-foster_tab-signed zip, ignore any errors that come up, they are expected.

17, Then install open_gapps-arm64-10.0-pico-20210213 zip

18, Then install Magisk-v21.4 THIS WILL GIVE YOU FULL ROOT

18 ,After you're done installing zips, press reboot to system in TWRP.

19, Set up and enjoy your new Android install! To launch it in the future use the 'More Configs' -> 'switchroot Android 10' option in hekate.

20, install games apps via usb or just use the google play store


REBOOT AND PERFORMANCE MODE

FIRST DOWNLOAD PAYLOADS
https://mega.nz/file/UoknmQAS#DhndLulWRufOZPUJFmJZUpmO1FFdUzLZr12DYg52imw

In Android goto setting and enable developer options this is done by
setting/about tablet and click the build number five times
now click on setting/systems/advanced/developer options/ and enable advanced restart this enable us to reboot to hekate via power menu and use the fusee-primary.bin in payloads to boot to switch CFW

also when in system/advanced goto display and performance configuration and enable performance

Sd card reboot payloads from payloads download
Place the reboot_payload.bin in your atmosphere folder and place the fusee-primary.bin in your bootloader\payloads folder this will allow us to reboot into hekate from switch cfw and boot to android via More Configs/switchroot Android 10

Enable USB
In Android go to setting/connected devices/usb/file transfer and select file transfer (temp)
Or goto setting/systems/advanced/developer options/default usb configuration and enable file transfer (perm)

Access Switch Hos partition
First install a root file manager i recommended Root Explorer by speed software
then simply follow (ROOT) mnt/vendor/factory/

ENJOY

 

[mspy]

How does Citra and Dolphin emulators perform on this new Android version?
I also heard something about PS2 emulator working thou with very low fps...

 

[prb]

How does Citra and Dolphin emulators perform on this new Android version?
I also heard something about PS2 emulator working thou with very low fps...

added Bully Anniversary Edition apk&data hard to find working copy but i did
dolphin (gamecube emu) is much better
Citra (3ds emu) have not yet tried
Damon ps2 (ps2 emu) far to many ads and slow
but with Bully Anniversary Edition and gta san andreas on android two of the best games on the ps2
— Posts automatically merged - Please don't double post! —
ADDED FREE APP STORE APK

M64Plus FZ Emulator for n64 is 100%
PPSSPP for PSP is 95% - 99%

from testing this is so much better then older version of android
im using my switch more for android atm its that good

— Posts automatically merged - Please don't double post! —
added how to Access Switch Hos partition so you can download switch games with android then install on switch
no more pc

 

[doop]

added Bully Anniversary Edition apk&data hard to find working copy but i did
dolphin (gamecube emu) is much better
Citra (3ds emu) have not yet tried
Damon ps2 (ps2 emu) far to many ads and slow
but with Bully Anniversary Edition and gta san andreas on android two of the best games on the ps2
— Posts automatically merged - Please don't double post! —
ADDED FREE APP STORE APK

M64Plus FZ Emulator for n64 is 100%
PPSSPP for PSP is 95% - 99%

from testing this is so much better then older version of android
im using my switch more for android atm its that good

— Posts automatically merged - Please don't double post! —
added how to Access Switch Hos partition so you can download switch games with android then install on switch
no more pc

Thank you works excellently. So much better than 15.1 .
Also free appstore link is down.

 

[prb]

Switchroot Android 10 Q Guide Full Dual Boot