written by shadow_the_hedgehog82
Normal method
Not sure if this is exactly safe but I did it and it seems to be working fine, the nag may come back if you go off of airplane mode though. I'm using 90dns and haven't had it come back so far so it should be fine.
You will need your biskeys to do this if you dont have them(you already should) look for another tutorial to see how.
Grab hacdiskmount and memloader from rajcuckos website https://switchtools.sshnuke.net/.
Open the memloader archive and copy the contents of the samples folder to the root of your sd card, now boot memloader.bin when the payload launches sel;ect ums_emmc from the menu.
Plug your switch into you pc if you see the "you need to format disk" popup just ignore it, now open hacdiskmount as administrator and then click file open psyhical drive then select linux ums disk
Once mounted in hacdisk mount click on your system partition then enter your biskeys for it and click mount
Now goto the mounted partition in your file manager and navigate to the save folder. Rename 000000000000000f to 000000000000000f.bak.
You should now be able to reboot and your supernag should be gone
Update Failure Method
let the Switch reach 10% or less for battery. Click to update, it will fall. Turn off wifi or enable a way to disable Nintendo Network. Done. No more update nagging you
make sure you dont have the charger connected
Recovery method
Enable airplane mode, then shutdown and boot in recovery mode (Vol + and - plus Power button), then shutdown again and power your console back on, and the nag will be gone as long as you don't connect to internet
Normal method
Not sure if this is exactly safe but I did it and it seems to be working fine, the nag may come back if you go off of airplane mode though. I'm using 90dns and haven't had it come back so far so it should be fine.
You will need your biskeys to do this if you dont have them(you already should) look for another tutorial to see how.
Grab hacdiskmount and memloader from rajcuckos website https://switchtools.sshnuke.net/.
Open the memloader archive and copy the contents of the samples folder to the root of your sd card, now boot memloader.bin when the payload launches sel;ect ums_emmc from the menu.
Plug your switch into you pc if you see the "you need to format disk" popup just ignore it, now open hacdiskmount as administrator and then click file open psyhical drive then select linux ums disk
Once mounted in hacdisk mount click on your system partition then enter your biskeys for it and click mount
Now goto the mounted partition in your file manager and navigate to the save folder. Rename 000000000000000f to 000000000000000f.bak.
You should now be able to reboot and your supernag should be gone
Update Failure Method
let the Switch reach 10% or less for battery. Click to update, it will fall. Turn off wifi or enable a way to disable Nintendo Network. Done. No more update nagging you
make sure you dont have the charger connected
Recovery method
Enable airplane mode, then shutdown and boot in recovery mode (Vol + and - plus Power button), then shutdown again and power your console back on, and the nag will be gone as long as you don't connect to internet
Last edited by a moderator: